Sienna FWD V6-3.3L (3MZ-FE) (2006)
/Page-759001.png)
Accelerator Pedal: Service and Repair
ACCELERATOR PEDAL ROD
REMOVAL
1. REMOVE ACCELERATOR PEDAL ROD ASSEMBLY
a. Disconnect the accelerator position sensor connector.
b. Remove the 2 bolts and the accelerator pedal rod.
INSTALLATION
1. INSTALL ACCELERATOR PEDAL ROD ASSEMBLY
Torque: 7.5 N.m (76 kgf.cm, 66 in.lbf)
