Sienna FWD V6-3.3L (3MZ-FE) (2006)
/Page-803002.png)
4. Check the resistance of the VVT sensor.
5. Check the resistance of the crankshaft position sensor.
6. Check the IGT signal from the ECM.
d. Using a 16 mm (0.63 in.) plug wrench, install the spark plugs.
Torque: 25 N.m (250 kgf.cm, 18 ft.lbf)
e. Install the ignition coil with igniter.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
f.
Install the V-bank cover sub-assembly.
