Sienna FWD V6-3.3L (3MZ-FE) (2006)
2. Install the parking brake control pedal assembly (LH only).
A. Install the parking brake control pedal assembly with a bolt and the 2 nuts.
Torque: 39 N*m (398 kgf*cm, 29 ft*lbf)
B. Connect the parking brake switch connector.
C. Connect the instrument panel junction block assembly with the 4 nuts.
Torque: 7.3 N*m (74 kgf*cm, 65 in*lbf)
3. Install the power back door drive unit (LH only).
A. Install the drive unit with the 3 bolts.
Torque: 12.5 N*m (112 kgf*cm, 9 ft*lbf)
B. Reset the drive unit.
4. Install the front shoulder belt anchor adjuster assembly with the bolt.
Torque: 42 N*m (430 kgf*cm, 31 ft*lbf)
5. Install the center pillar upper garnish.
6. Install the front seat outer belt assembly.
NOTICE
Do NOT disassemble the retractor.
A. Install the retractor with the 2 bolts.
Torque: 42 N*m (430 kgf*cm, 31 ft*lbf)
B. Install the shoulder anchor with the nut.
Torque: 42 N*m (430 kgf*cm, 31 ft*lbf)