Sienna FWD V6-3.3L (3MZ-FE) (2006)
/Page-1325002.png)
between other parts.
d. Connect the connector to the front airbag sensor LH.
e. Check that there is no looseness in the installation parts of the front airbag sensor LH.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
3. PERFORM INITIALIZATION
a. Perform initialization.
HINT: Some systems need initialization when disconnecting the cable from the negative battery terminal.
4. INSPECT SRS WARNING LIGHT
a. Inspect the SRS warning light.
