Sienna FWD V6-3.3L (3MZ-FE) (2006)
Remote Switch: Service and Repair
STEERING PAD SWITCH
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE STEERING WHEEL NO. 2 LOWER COVER
3. REMOVE STEERING WHEEL NO. 3 LOWER COVER
4. REMOVE HONE BUTTON ASSEMBLY
5. REMOVE STEERING PAD SWITCH LH
a. Disconnect the connector.
b. Disconnect the connector of cruise control main switch.
c. Remove the screw.
d. w/o Laser radar cruise control:
1. Release the 2 pin fittings and remove the steering pad switch LH.
e. w/ Laser radar cruise control:
1. Remove the clamp.
f.
w/ Laser radar cruise control:
1. Release the 2 pin fittings and release the steering pad switch LH from steering wheel.