Sienna FWD V6-3.3L (3MZ-FE) (2006)
b. Lock the hose clamp as shown in the illustration.
c. Disconnect the heater water inlet hose B.
d. Remove the nut and the ground cable.
e. Disconnect the 6 fuel injector connectors.
f.
In order to remove the intake manifold, using several steps, remove the 9 bolts and the 2 nuts in the sequence shown in the illustration.
15. REMOVE ENGINE MOUNTING STAY RH
a. Remove the 2 bolts and the engine mounting stay.
16. REMOVE WATER OUTLET