Sienna FWD V6-3.3L (3MZ-FE) (2006)
Transmission Position Switch/Sensor: Adjustments
PARK/NEUTRAL POSITION SWITCH
ADJUSTMENT
1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
a. Loosen the 2 bolts of the park/neutral position switch and move the shift lever to the N position.
b. Align the groove with the neutral basic line.
c. Hold the switch in position and tighten the 2 bolts.
Torque: 5.4 Nm (55 kg-cm, 48 in. lbs.)
d. After adjustment, perform the inspection described in park/neutral position switch assembly operation.