Sienna FWD V6-3.3L (3MZ-FE) (2006)
/Page-322001.png)
Wiper Switch: Service and Repair
REMOVAL
1. REMOVE STEERING COLUMN COVER
2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
a. Disconnect the connector.
b. Using a screwdriver, disengage the claw and pull out the windshield wiper switch assembly.
NOTE: The claw will be broken if pressed hard.
HINT: Tape up the screwdriver tip before use.
INSTALLATION
1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
2. INSTALL STEERING COLUMN COVER