Sienna FWD V6-3.3L (3MZ-FE) (2006)
/Page-1031002.png)
h. Remove the 3 bolts and the air cleaner case.
5. REMOVE AIR CLEANER BRACKET
a. Remove the 2 bolts and the air cleaner bracket.
6. REMOVE NO. 1 AIR CLEANER INLET
a. Remove the bolt and the No. 1 air cleaner inlet.
7. REMOVE STARTER ASSEMBLY
a. Disconnect the starter connector.
b. Open the terminal cap and remove the nut and the starter wire.
c. Remove the 2 bolts and the starter.
INSTALLATION
1. INSTALL STARTER ASSEMBLY
