Sienna FWD V6-3.3L (3MZ-FE) (2006)
3. REMOVE FRONT FENDER APRON SEAL RH
4. DISCONNECT OIL RESERVOIR TO PUMP HOSE NO.1
a. Remove the clip and disconnect the oil reservoir to pump hose No.1.
NOTICE: Take care not to spill fluid on the V belt.
5. REMOVE POWER STEERING OIL PRESSURE SWITCH
a. Disconnect the connector.
b. Remove the oil pressure switch from the union bolt.
NOTICE: Be careful not to drop the oil pressure switch.
If the oil pressure switch is dropped or strongly damaged, replace it with a new one.
6. DISCONNECT PRESSURE FEED TUBE ASSEMBLY
a. Using a spanner (24 mm) to hold the pressure port union, remove the union bolt and the gasket.
b. Disconnect the pressure feed tube assembly.
7. REMOVE VANE PUMP V BELT
a. Loosen the 2 bolts and remove the vane pump V belt.
8. REMOVE VANE PUMP ASSEMBLY
a. Remove the 2 bolts and the vane pump assembly.