Sienna FWD V6-3.3L (3MZ-FE) (2006)
/Page-1141008.png)
15. REMOVE POWER STEERING CONTROL VALVE UPPER OIL SEAL
a. Using SST and a press, remove the control valve upper bearing and control valve upper oil seal from the control valve housing.
SST 09950-70010 (09951-07150), 09950-60010 (09951-00250)
16. REMOVE CYLINDER END STOPPER
a. Using a screwdriver and a hammer, turn the cylinder end stopper clockwise until the wire end is visible through the service hole.
b. Using a screwdriver and a hammer, turn the cylinder end stopper counterclockwise, and remove the wire and cylinder end stopper.
17. REMOVE POWER STEERING RACK
18. REMOVE POWER STEERING RACK BUSH
a. Remove the rack bush from the power steering rack.
b. Using SST, remove the rack bush oil seal.
SST 09527-21011, 09612-24014 (09613-22011)
c. Using a screwdriver, remove the O-ring from the rack bush.
