Sienna FWD V6-3.3L (3MZ-FE) (2006)
3. INSTALL POWER STEERING RACK
a. Install SST onto the power steering rack.
SST 09631-33010
HINT: If necessary, scrape the burrs off the power steering rack teeth end and burnish.
b. Coat the SST with power steering fluid.
c. Install the power steering rack into the rack housing.
d. Remove the SST
4. INSTALL POWER STEERING RACK BUSH
a. Using SST and a press, install the rack bush oil seal onto the rack bush.
SST 09950-60010 (09951-00400), 09950-70010 (09951-07100)
NOTICE: Make sure that the rack bush oil seal is installed facing in the correct direction.
b. Coat a new O-ring with power steering fluid and install it onto the rack bush.
c. To prevent rack bush oil seal lip damage, wind vinyl tape around the rack end, and apply power steering fluid.
d. Install the rack bush onto the power steering rack.