Sienna FWD V6-3.3L (3MZ-FE) (2006)
j.
Apply grease to the needle roller bearing.
k. Install a new gasket onto the control valve housing.
l.
Wind vinyl tape around the serrated part of the control valve.
m. Install the control valve w/control valve housing onto the rack housing with the 2 bolts.
Torque: 18 Nm (184 kg-cm, 13 ft. lbs.)
n. Using SST, hold the control valve rotation and install a new lock nut.
SST 09616-00011
Torque: 25 Nm (250 kg-cm, 18 ft. lbs.)
o. Apply sealant to 2 or 3 threads of the rack housing cap.
Sealant: Part No.08833-00080, THREE BOND 1344, LOCTITE 242 or equivalent
p. Using a socket wrench (27 mm), install the rack housing cap.
Torque: 59 Nm (597 kg-cm, 43 ft. lbs.)
q. Using a punch and a hammer, stake the rack housing cap and rack housing.
9. INSTALL RACK GUIDE
a. Install the rack guide.
b. Install the compression spring.