Sienna FWD V6-3.3L (3MZ-FE) (2006)
intermediate shaft.
4.
Install the NEW steering intermediate shaft sub-assembly.
A.
Align the matchmark with the one on the steering sliding yoke sub-assembly and the steering main shaft assembly.
B.
Install the steering sliding yoke sub-assembly with the bolt.
Torque: 36 N.m (370 kgf.cm, 27 ft.lbf)
5.
Connect the steering intermediate shaft sub-assembly.
A.
Align the matchmarks on the steering intermediate shaft sub-assembly and the steering gear assembly.
B.
Install the steering intermediate shaft sub-assembly with the bolt.
Torque: 36 N.m (370 kgf.cm, 27 ft.lbf)
C.
Install the steering column hole cover to the steering hole cover boot.