Sienna FWD V6-3.3L (3MZ-FE) (2006)
31. REMOVE BRAKE BACKING PLATE SUB-ASSEMBLY RH (for DRUM REAR BRAKE)
HINT: Remove the RH side by the same procedures as the LH side.
32. SEPARATE SHOCK ABSORBER ASSEMBLY REAR LH
33. SEPARATE SHOCK ABSORBER ASSEMBLY REAR RH
HINT: Separate the RH side by the same procedures as the LH side.
34. REMOVE COIL SPRING REAR LH
35. REMOVE COIL SPRING REAR RH
HINT: Remove the RH side by the same procedures as the LH side.
36. REMOVE REAR AXLE BEAM ASSEMBLY
a. Support the rear axle beam assembly with a jack.
b. Remove the 2 bolts and 2 nuts.
c. Remove the rear axle beam assembly.
NOTICE: When loosening the bolt, hold the nut not to rotate.
37. REMOVE REAR BRAKE TUBE FLEXIBLE HOSE
a. Using SST, separate the brake tube from the flexible hose.
SST 09023-00101
b. Remove the clip and flexible hose.
HINT: Remove the RH side by the same procedures as the LH side.