Sienna FWD V6-3.3L (3MZ-FE) (2006)
Ball Joint: Testing and Inspection
FRONT LOWER BALL JOINT
INSPECTION
1. INSPECT LOWER BALL JOINT ASSEMBLY FRONT LH
a. As shown in the illustration, flip the ball joint stud back and forth 5 times, before installing the nut.
b. Using a torque wrench, turn the nut continuously at a rate of 3 - 5 seconds per 1 turn and take the torque reading on the 5th turn.
Turning torque: 0.98 to 3.43 Nm (10 to 35 kg-cm, 8.7 to 30 inch lbs.)