Sienna FWD V6-3.3L (3MZ-FE) (2006)
/Page-1157002.png)
2. REMOVE TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR
a. Remove the 3 nuts and transverse engine engine mounting insulator.
3. REMOVE FRONT SUSPENSION ARM SUB ASSEMBLY LOWER NO.1 LH
a. Remove the 2 bolts on the front side of the front suspension arm sub-assembly lower No.1 LH.
b. Remove the bolt and nut on the rear side of the front suspension arm sub-assembly lower No.1 LH.
c. Remove the front suspension arm sub-assembly lower No.1 LH.
d. Remove the front lower arm bush stopper from the front suspension arm sub-assembly lower No.1 LH.
INSTALLATION
1. INSTALL FRONT SUSPENSION ARM SUB ASSEMBLY LOWER NO.1 LH
a. Install the front lower arm bush stopper to the front suspension arm sub-assembly lower No.1 LH.
b. Install the bolt and nut to the rear side of the front suspension arm sub-assembly lower No.1 LH.
Torque: 206 Nm (2,100 kg-cm, 152 ft. lbs.)