Sienna FWD V6-3.3L (3MZ-FE) (2006)
b. Remove the 9 bolts, cowl top brace and cowl top panel sub-assembly outer front.
8. REMOVE FRONT STABILIZER LINK ASSEMBLY LH
a. Remove the nut and disconnect the front stabilizer link assembly LH from the shock absorber assembly front LH.
HINT: If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.
9. REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING
a. Loosen the lock nut.
NOTICE:
^
Do not loosen the nut except for the purpose of disassembling the shock absorber assembly front LH with coil spring.
^
Do not remove the lock nut.
b. Remove the bolt, and disconnect the front flexible hose No.1 and speed sensor front LH.