Sienna FWD V6-3.3L (3MZ-FE) (2006)
/Page-849003.png)
b. Coat the lip of the oil seal with MP grease.
3. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH
4. INSTALL FRONT DRIVE SHAFT ASSEMBLY RH (for 2WD)
5. INSTALL FRONT WHEELS
Torque: 103 Nm (1,050 kg-cm, 76 ft. lbs.)
6. ADD AUTOMATIC TRANSAXLE FLUID
7. INSPECT AUTOMATIC TRANSAXLE FLUID
8. INSTALL ENGINE UNDER COVER NO.1
9. CHECK ABS SPEED SENSOR SIGNAL
