Sienna FWD V6-3.3L (3MZ-FE) (2006)
Torque: 6.9 Nm (70 kg-cm, 61 inch lbs.)
d. Temporarily install the control shaft lever.
e. Turn the lever counterclockwise until it stops, then turn it clockwise 2 notches.
f.
Remove the control shaft lever.
g. Align the groove with the neutral basic line.
h. Hold the switch in position and tighten the 2 bolts.
Torque: 5.4 Nm (55 kg-cm, 48 inch lbs.)
i.
Using a screwdriver, bend the tabs of the lock plate.
j.
Install the control shaft lever, washer and the nut.
Torque: 13 Nm (130 kg-cm, 9 ft. lbs.)