Sienna FWD V6-3.3L (3MZ-FE) (2006)
f.
Using a screwdriver, disconnect the cable end from the shift lever assembly
g. Using a small screwdriver, disconnect the cable outer of transmission control cable assembly from the shift lever assembly.
h. Pull out the control cable from the vehicle.
ADJUSTMENT
1. INSPECT SHIFT LEVER POSITION
a. When shifting from P to R position only with ignition switch ON and brake pedal, make sure that the shifting lever moves smoothly and can be
moderately operated.
b. When starting engine, make sure that the vehicle moves forward when shifting from N to D position and moves rearward when shifting to R
position.
2. ADJUST SHIFT LEVER POSITION
a. Loosen the nut on the control shaft lever.
b. Push the control shaft fully downward.
c. Return the control shaft lever 2 notches to the N position.