Sienna FWD V6-3.3L (3MZ-FE) (2006)
10. REMOVE REAR DIFFERENTIAL SIDE GEAR SHAFT SUB-ASSEMBLY
a. Using needle nose pliers, remove the 2 snap rings from the 2 side gear shafts.
b. Remove the 2 side gear shafts.
11. REMOVE REAR DIFFERENTIAL SIDE GEAR SHAFT DUST COVER
a. Using a screwdriver and a hammer remove the side gear shaft dust cover.
12. REMOVE REAR DIFFERENTIAL SIDE GEAR SHAFT SEAL OIL
a. Using SST, remove the 2 oil seal from the housing.
SST 09308-00010
13. REMOVE REAR DRIVE PINION NUT
a. Using SST and a hammer, unstake the staked part of the nut.
SST 09930-00010