Sienna FWD V6-3.3L (3MZ-FE) (2006)
c. Inspection the tooth contact pattern.
If the teeth are not contacting properly, use table to select proper washer for correction.
Washer Thickness
14. REMOVE REAR DRIVE PINION NUT
15. REMOVE REAR DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY
16. REMOVE REAR DIFFERENTIAL DRIVE PINION OIL SLINGER
a. Remove the rear differential drive pinion oil slinger.
17. REMOVE REAR DRIVE PINION FRONT TAPERED ROLLER BEARING
18. INSTALL REAR DIFFERENTIAL DRIVE PINION BEARING SPACER
a. Install a new bearing spacer.
19. INSTALL REAR DRIVE PINION FRONT TAPERED ROLLER BEARING
a. Install the rear drive pinion front tapered roller bearing to the drive pinion.