Sienna FWD V6-3.3L (3MZ-FE) (2006)
Fluid - Differential: Service and Repair
DIFFERENTIAL OIL
ON-VEHICLE INSPECTION
1. INSPECT DIFFERENTIAL OIL
a. Stop the vehicle on the level place.
b. Remove the differential filler plug and gasket.
c. Check that the oil surface is within 5 mm (0.20 inch) from the lowest position of the inner surface of the differential filler plug opening.
NOTICE:
-
Excessively large or small amount of oil may cause troubles.
-
After replacing oil, drive the vehicle and check the oil level.
d. Check for oil leakage when the oil level is low.
e. Install the differential filler plug and a new gasket.
Torque: 49 Nm (500 kg-cm, 36 ft. lbs.)