Sienna FWD V6-3.3L (3MZ-FE) (2006)
5. REMOVE REAR DRIVE PINION NUT
a. Using a chisel and a hammer, unstake the staked part of the nut.
b. Using SST to hold the flange, remove the nut.
SST 09330-00021
6. REMOVE REAR DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY
a. Using SST remove the companion flange.
SST 09950-30012 (09951-03010, 09953-03010, 09954-03010, 09955-03030, 09956-03020)
7. REMOVE REAR DIFFERENTIAL CARRIER OIL SEAL
a. Using SST remove the oil seal. SST 09308-10010
8. REMOVE REAR DIFFERENTIAL DRIVE PINION OIL SLINGER
9. REMOVE REAR DRIVE PINION FRONT TAPERED ROLLER BEARING
a. Using SST, remove the front tapered roller bearing.
SST 09556-22010
INSTALLATION
1. INSTALL REAR DIFFERENTIAL DRIVE PINION BEARING SPACER