Sienna FWD V6-3.3L (3MZ-FE) (2006)
/Page-908006.png)
k. Connect the park/neutral position switch connector.
2. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
a. Connect the control cable to the control shaft lever with the nut.
Torque: 13 Nm (133 kg-cm, 10 ft. lbs.)
b. Install the control cable with a new clip to the bracket.
3. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
4. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY OPERATION
5. INSPECT SHIFT LEVER POSITION
6. ADJUST SHIFT LEVER POSITION
7. INSTALL AIR CLEANER ASSEMBLY
8. INSTALL BATTERY
