Sienna FWD V6-3.3L (3MZ-FE) (2006)
13. CLEAN BACK DOOR GLASS
a. Clean the outer circumference of the glass white gasoline.
NOTE:
-
Do not touch the glass surface after cleaning it.
-
Be careful not to damage the body.
INSTALLATION
1. INSTALL BACK DOOR GLASS
a. Clean and shape the contact surface of the vehicle body.
1. Using a knife, cut away any rough adhesive on the contact surface of the body to ensure the appropriate surface shape.
HINT: Leave as much adhesive on the body as possible.
2. Clean the contact surface of the body with a shop rag saturated with cleaner.
HINT: Even if all the adhesive has been remove, clean the body.
b. Using a brush, coat the exposed part of the body on the vehicle side with Primer M.
NOTE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not coat the adhesive with Primer M.
-
Do not keep any of the opened Primer M for later use.