toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Body - Windshield/Back Glass Ticking Noise|Page 9028 > < Body - Windshield/Back Glass Ticking Noise|Page 9026
Page 6
background image

4. Test drive vehicle prior to reassembly to confirm that the noise has been eliminated.

5. Reassemble the vehicle.

Windshield Retainers (at Lower Edge of Windshield)

1. Carefully remove the plastic cowl top ventilator louver at the base of the windshield and store it in a safe location for reinstallation later (refer to the

appropriate model year Repair Manual for the proper procedure).

2. Locate the lower windshield retainers.

The retainers are typically located 140 - 200 mm (5.5 - 7.9 in.) inboard of the lower corners of the windshield. The flat portion of the retainer is
adhered to the backside of the windshield with double-sided foam-backed tape.

Body - Windshield/Back Glass Ticking Noise|Page 9028 > < Body - Windshield/Back Glass Ticking Noise|Page 9026