Sienna FWD V6-3.5L (2GR-FE) (2009)
Key Cylinder Lamp: Testing and Inspection
LIGHTING: IGNITION KEY CYLINDER LIGHT: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. KEY CYLINDER LIGHT ASSEMBLY
(a) Connect the battery positive (+) lead to the terminal 1 and the battery negative (-) lead to the terminal 2, and check that the indicator light
comes on.
2. TRANSPONDER KEY AMPLIFIER
(a) Inspect key cylinder light operation.
(1) Connect the battery positive (+) lead to the terminal 2 and the battery negative (-) lead to the terminal 6, and check that the indicator light
comes on.