Sienna FWD V6-3.5L (2GR-FE) (2009)
/Page-2331001.png)
Vanity Lamp: Testing and Inspection
LIGHTING: VANITY LIGHT: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. LH VISOR ASSEMBLY
(a) Inspect vanity light resistance.
(1) check that the resistance exists between the terminal 1 and the terminal 2 when the light is operated.
Resistance:
OFF (closed)
10 kOhms or higher
ON (opened)
Below 1 Ohms
2. RH VISOR ASSEMBLY
(a) Inspect vanity light resistance.
(1) check that the resistance exists between the terminal 1 and the terminal 2 when the light is operated.
Resistance:
OFF (closed)
10 kOhms or higher
ON (opened)
Below 1 Ohms
