Sienna FWD V6-3.5L (2GR-FE) (2009)
Alarm Module: Service and Repair
Installation
ENGINE IMMOBILISER: TRANSPONDER KEY ECU: INSTALLATION
INSTALLATION
1. INSTALL TRANSPONDER KEY ECU
(a) Install the transponder key ECU with the nut.
Torque: 5.5 Nm (56 kgf-cm, 49in-lbf)
2. INSTALL TRANSPONDER KEY BRACKET (w/ Bracket)
(a) Install the transponder key bracket with the nut.
Torque: 5.5 Nm (56 kgf-cm, 49in-lbf)
3. INSTALL AIR CONDITIONING UNIT ASSEMBLY See: Heating and Air Conditioning/Housing Assembly HVAC/Service and
Repair/Installation
4. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Installation
5. REGISTER ECU COMMUNICATION ID
NOTICE: When replacing the transponder key ECU, perform initialization See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Testing and Inspection/Programming and Relearning/Engine Immobiliser System.
6. REGISTER KEY
NOTICE: When replacing the transponder key ECU, perform initialization See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Testing and Inspection/Programming and Relearning/Engine Immobiliser System.