toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Radio, Stereo, and Compact Disc|Testing and Inspection > < Diagram Information and Instructions|Page 6633
Page 2
background image

c. Fade Out

Because FM radio waves are of higher frequencies than AM radio waves, they bounce off buildings, mountains, and other obstructions. For
this reason, FM signals often seem to gradually disappear or fade away as the vehicle goes behind a building or other obstructions. This is
called "fade out".

4. COMPACT DISC PLAYER

Compact Disc (hereafter called "CD") Players use a laser beam pick-up to read the digital signals recorded on the CD and reproduce analog
signals of the music, etc. There are 4.7 in. (12 cm) and 3.2 in. (8 cm) discs in the CD player.

HINT:  Never attempt to disassemble or oil any part of the player unit Do not insert any object other than a disc into the magazine.

NOTE:  CD player use an invisible laser beam which could cause hazardous radiation exposure. Be sure to operate the player correctly as
instructed.

5. Tape Player/Head Cleaning:

MAINTENANCE

a. Raise the cassette door with your finger.

Next, using a pencil or like object, push in the guide.

b. Using a cleaning pen or cotton applicator soaked in cleaner, clean the head surface, pinch rollers and capstans.

6. CD Player/Disc Cleaning:

MAINTENANCE

If the disc gets dirty, clean the disc by wiping the surfaces from the center to outside in the radial directions with a soft cloth.

NOTE:  Do not use a conventional record cleaner or anti-static preservative.

Radio, Stereo, and Compact Disc|Testing and Inspection > < Diagram Information and Instructions|Page 6633