Sienna LE V6-3.0L (1MZ-FE) (1998)
Power Door Lock Actuator: Testing and Inspection
INSPECT FRONT DOOR LOCK MOTOR OPERATION
a. Connect the positive (+) lead from the battery to terminal 3 and the negative (-) lead to terminal 2, and check that the door lock link moves to
UNLOCK position.
b. Remove the polarity and check that the door lock link moves to LOCK position.
If operation is not as specified, replace the door lock assembly.
INSPECT SLID DOOR LOCK MOTOR OPERATION
a. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check that the door lock link moves to
UNLOCK position.
b. Remove the polarity and check that the door lock link moves to LOCK position.
If operation is not as specified, replace the door lock assembly.
INSPECT BACK DOOR LOCK MOTOR OPERATION