Sienna LE V6-3.0L (1MZ-FE) (1998)
/Page-1533002.png)
HINT: Tape the screwdriver tip before use.
2. REMOVE REAR HEATER CONTROL ASSEMBLY
Remove the 2 screws and heater control assembly, then disconnect the connectors.
INSTALLATION
Installation is in the reverse order of removal.
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE HEATER CONTROL KNOBS
2. REMOVE HEATER BLOWER SWITCH
a. Remove the bulb.
b. Disconnect the bulb holder.
c. Remove the 2 screws and switch
REASSEMBLY
Reassembly is in the reverse order of disassembly.
