Sienna LE V6-3.0L (1MZ-FE) (1998)
c. Using SST and a press, press in a new bearing.
SST 09950-60010 (09951-00500)
d. Install the bearing retainer with the 4 screws.
Torque: 3.0 N.m (31 kgf.cm, 27 in.lbf)
11. INSPECT REAR BEARING
Check that the bearing is not rough or worn.
12. IF NECESSARY, REPLACE REAR BEARING
a. Using SST, remove the bearing cover (outside) and bearing.
SST 09820-00021
NOTE: Be careful not to damage the fan.
b. Remove the bearing cover (inside).
c. Place the bearing cover (inside) on the rotor.