Sienna LE V6-3.0L (1MZ-FE) (1998)
Wheel Fastener: Service and Repair
Rear
REPLACEMENT
1. Remove rear wheel.
2. Remove brake drum.
3. Remove hub bolt.
Using Special Service Tools (SST) 09628-10011 or equivalent, remove the hub bolt.
4. Install new hub bolt.
Install a washer and nut to the hub bolt, as shown in the illustration, and install the hub bolt by tightening the nut.
5. Install brake drum.
6. Install rear wheel.
Torque: 104 Nm (77 ft. lbs.)