Solara L4-2.4L (2AZ-FE) (2006)
/Page-1301001.png)
Keyless Entry Receiver: Testing and Inspection
INSPECT DOOR CONTROL RECEIVER
a. Disconnect the D4 receiver connector.
b. Measure the voltage and resistance of the wire harness side connector.
Voltage and resistance:
If the result is not as specified, there may be a malfunction on the wire harness side.
c. Reconnect the D4 receiver connector.
d. Measure the voltage of the connector.
If the result is not as specified, there may be a malfunction on the receiver.
