Solara L4-2.4L (2AZ-FE) (2006)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Actuator (w/ VSC)
REMOVAL
1. DRAIN BRAKE FLUID
NOTE: Wash brake fluid off immediately if it adheres to any painted surface.
2. DISCONNECT BATTERY NEGATIVE TERMINAL
3. REMOVE BRAKE ACTUATOR WITH BRACKET
a. Using SST, disconnect the 6 brake tubes from the actuator with bracket.
b. Use tags or make a memo to identify the reconnection points.
c. Pull the lock lever upward.
d. Disconnect the actuator connector.