Solara L4-2.4L (2AZ-FE) (2006)
Wheel Speed Sensor: Service and Repair
Skid Control Sensor
SKID CONTROL SENSOR
REMOVAL
HINT:
-
Use the same procedures for the RH side and LH side.
-
The procedures listed below are for the LH side.
1. REMOVE REAR WHEEL
2. SEPARATE SKID CONTROL SENSOR WIRE
a. Disconnect the connector from the skid control sensor.
3. REMOVE REAR DISC BRAKE CALIPER ASSEMBLY LH
4. REMOVE REAR DISC
a. Put matchmarks on the rear disc and the axle hub.
b. Release the parking brake, and remove the rear disc.
HINT: If the disc cannot be removed easily, turn the shoe adjuster until the wheel turns freely.
5. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY LH