Solara L4-2.4L (2AZ-FE) (2006)
25. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY
a. Remove the bolt, nut and tensioner.
26. INSTALL ENGINE HANGERS
a. Install the engine hanger No. 1 and No. 2 with the bolts as shown in the illustration.
Parts No.
Torque: 38 Nm (387 kgf-cm, 28 ft. lbs.)
27. REMOVE ENGINE MOUNTING INSULATOR
a. Attach the engine chain hoist to the engine hangers.
CAUTION: Do not attempt to hang the engine by hooking the chain to any other part.
b. Remove the bolt and disconnect the engine mounting insulator FR.
c. M/T: