Solara L4-2.4L (2AZ-FE) (2006)
[Q]: Indicates the reference showing the position on the vehicle of Relay Block Connectors in the system circuit.
Example : Connector "1" is described and is installed on the left side of the instrument panel.
[R] : Indicates the reference showing the position on the vehicle of J/B and Wire Harness in the system circuit.
Example : Connector "3C" connects the Instrument Panel Wire and J/B No.3.It is described and is installed on the instrument panel left side
[S] : Indicates the reference describing the wiring harness and wiring harness connector (the female wiring harness is shown first, followed by the male
wiring hamess).
Example : Connector "IE1" connects the floor wire (female) and Instrument panel wire (male). It is described and is installed on the left side kick
panel.
[T] : Indicates the reference showing the position of the ground points on the vehicle.
Example : Ground point "BO" is described and is installed on the back panel center.
How to Read Connector List
HOW TO READ CONNECTOR LIST
[A] : Indicates connector to be connected to a part. (The numeral indicates the pin No.)
[B] : Junction Connector
Indicates a connector which is connected to a short terminal.