Solara L4-2.4L (2AZ-FE) (2006)
-
Cracks or other damage to the connector.
Function of Passenger Air Bag ON/OFF Indicator
FUNCTION OF PASSENGER AIRBAG ON/OFF INDICATOR
a. Initial check.
1. Turn the ignition switch to the ON position.
2. The passenger airbag ON/OFF indicator ("ON" and "OFF") come on for approximately 4 seconds, then goes off for approximately 2 seconds.
3. Approximately 6 seconds after the ignition switch is turned to the ON position, the passenger airbag ON/OFF indicator will be ON/ OFF
depending on the conditions listed.
HINT:
-
The passenger airbag ON/OFF indicator is based on the timing chart below in order to check the indicator light circuit.
-
When the occupant classification system has trouble, both the SRS warning light and the passenger airbag ON/OFF indicator ("OFF")
come on. In this case, check the DTCs in the "AIRBAG SYSTEM" first.
Trouble In Passenger Airbag ON/OFF Indicator
Trouble in Passenger Airbag ON/OFF Indicator
DESCRIPTION
The occupant classification system detects the front passenger seat condition. It then informs a passenger of the front passenger airbag assembly
condition (activated/not activated) by the passenger airbag ON/OFF indicator.
The table shows the normal indication condition of the passenger airbag ON/OFF indicator and the front passenger seat condition.