Solara L4-2.4L (2AZ-FE) (2006)
Axle Shaft Assembly: Service and Repair
Disassembly
FRONT DRIVE SHAFT
DISASSEMBLY
1. REMOVE FRONT AXLE INBOARD JOINT BOOT LH NO.2 CLAMP
a. Using pliers, remove the inboard joint boot LH No.2 clamp, as shown in the illustration.
2. REMOVE FRONT AXLE INBOARD JOINT BOOT LH CLAMP
a. Remove the inboard joint boot LH clamp, as shown in the illustration.
3. SEPARATE INBOARD JOINT BOOT
a. Separate the inboard joint boot from the inboard joint assembly.
4. REMOVE FRONT DRIVE INBOARD JOINT ASSEMBLY LH
a. Put matchmarks on the inboard joint assembly and outboard joint shaft.
NOTICE: Do not use a punch for the marks.
b. Remove the inboard joint assembly from the outboard joint shaft.