Solara L4-2.4L (2AZ-FE) (2006)
Wiper Motor: Testing and Inspection
FRONT WIPER MOTOR
INSPECTION
1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY
a. LO Operation Check
1. Connect the positive battery (+) lead to terminal 1 (+1) of the connector and the negative battery (-) lead to terminal 5 (E) of the connector,
and check that the motor operates at low speed (LO).
b. HI Operation Check
1. Connect the positive battery (+) lead to terminal 4 (+2) of the connector and the negative battery (-) lead to terminal 5 (E), and check that
the motor operates at high speed (HI).
c. Automatic Stop Operation Check
1. Connect the positive battery (+) lead to terminal 1 (+1) of the connector and the negative battery (-) lead to terminal 5 (E) of the connector.
With the motor being rotated at low speed (LO), disconnect terminal 1 (+1) to stop the wiper motor operation at any position except the
automatic stop position.
2. Using SST, connect terminals 1 (+1) and 3 (S), and the positive battery (+) lead to terminal 2 (B) to restart the motor operation at low
speed (LO).
SST 09843-18040
3. Check that the motor stops automatically at the automatic stop position.
Standard: Refer to the illustration.