Solara V6-3.3L (3MZ-FE) (2004)
/Page-493003.png)
a) Install the rear support bracket with the 2 bolts.
Torque: 33 Nm (337 kgf-cm, 24 ft. lbs.)
NOTICE: Do not install the bracket facing the wrong direction.
14. INSTALL FLOOR PANEL BRACE REAR
a) Install the floor panel brace with the 2 bolts.
Torque: 19.5 Nm (199 kgf-cm, 14 ft. lbs.)
15. INSTALL FRONT EXHAUST PIPE NO. 1 SUPPORT BRACKET
a) Install the front support bracket with the 2 nuts.
Torque: 33 Nm (337 kgf-cm, 24 ft. lbs.)
NOTICE: Do not install the support bracket facing the wrong direction.
16. INSTALL HEATED OXYGEN SENSOR
a) Install the 2 heated oxygen sensors (bank 1, 2 sensor 2).
Torque: 44 Nm (449 kgf-cm, 32 ft. lbs.)
b) Connect the 2 heated oxygen sensor (bank 1, 2 sensor 2) connectors.
17. CHECK FOR EXHAUST GAS LEAKS
If gas is leaking, tighten the areas necessary to stop the leak. Replace damaged parts as necessary.
