Solara V6-3.3L (3MZ-FE) (2004)
Required Tools & Equipment
Additional SSTs may be ordered by calling 1-800-933-8335.
Additional TIS Techstream units may be ordered by calling Approved Dealer Equipment (ADE).
Work must be started more than 90 seconds AFTER the ignition switch is turned to the LOCK position and the negative (-) terminal cable is
disconnected from the battery. (The SRS is equipped with a back-up power source. If work is started within 90 seconds from disconnecting the
negative (-) terminal cable of the battery, the SRS may deploy).
1. Disconnect cable from the negative (-) battery terminal.
2. Remove front door scuffle plate LH.
A. Using a plastic pry tool disengage the 2 claws labeled A, 2 claws labeled B, 4 claws labeled C and 5 clips and remove the scuff plate.
3. Remove cowl side trim sub-assembly LH.