toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Vehicle - Various Systems Initialization Procedures|Page 65 > < Vehicle - Various Systems Initialization Procedures
Page 2
background image

The removed D.C.C. fuse (30 A) is stored in the blank space of the junction block in the engine compartment. The D.C.C. fuse must be reinstalled to the
original location during Pre-Delivery Service (PDS) in the dealership as shown.

NOTE

^ Removing the D.C.C. fuse cuts oft power sources relating to the Dome, ECU-B and RAD No.1 fuses.

^ If the vehicle is stored in the dealership for a long period of time after PDS, disconnect the negative battery terminal to prevent battery discharge.

Refer to TSB PG017-02 for battery maintenance information.

ITEM NO.2:
FRONT LICENSE PLATE MOUNTING BRACKET AND LICENSE PLATE INSTALLATION

Introduction

The front license plate mounting bracket and two self-tapping screws are included in the luggage compartment at the assembly plant.

Installation Procedure

Vehicle - Various Systems Initialization Procedures|Page 65 > < Vehicle - Various Systems Initialization Procedures