Solara Convertible V6-3.3L (3MZ-FE) (2008)
Condenser HVAC: Service and Repair
Installation
AIR CONDITIONING: CONDENSER:
INSTALLATION
1. INSTALL COOLER CONDENSER BRACKET NO.2
(a) Install the cooler condenser bracket No.2 with the bolt.
Torque: 4.4 Nm (45 kgf-cm, 39 in-lbf)
2. INSTALL COOLER CONDENSER BRACKET NO.1
(a) Install the cooler condenser bracket No.1 with the bolt.
Torque: 4.4 Nm (45 kgf-cm, 39 in-lbf)
3. INSTALL COOLER CONDENSER ASSEMBLY
(a) Install the cooler condenser assembly with the 2 nuts.
Torque: 9.8 Nm (100 kgf-cm, 85 in-lbf)
HINT: If the condenser is replaced with a new one, add compressor oil to the new condenser.
Capacity:
40 cc (1.4 fl. oz.)
Compressor oil:
ND-8 or equivalent
4. INSTALL RADIATOR SUPPORT UPPER
HINT:
-
2AZ-FE (See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and Replacement/Installation)
-
3MZ-FE (See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and Replacement/Installation)
5. INSTALL COOLER REFRIGERANT LIQUID PIPE A
(a) Remove the attached vinyl tape from the tube and connecting part of the cooler condenser assembly.
(b) Sufficiently apply compressor oil to a new O-ring and pipe joint.
Compressor oil: