Solara Convertible V6-3.3L (3MZ-FE) (2008)
(b) Measure the resistance between terminals 14 (CANL) and 16 (BAT) of the DLC3 each time a connector is disconnected.
Standard resistance:
OK -- CHECK FOR SHORT TO +B IN CAN BUS WIRE
NG -- Continue to next step.
3. CHECK FOR SHORT TO B+ IN CAN BUS WIRE
(a) Disconnect the connectors from the No. 1 CAN J/C one at a time.
HINT: Disconnect the ECU and sensor connectors other than the DLC3 branch wires and CAN main bus wires between the No. 1 CAN J/C
and No. 2 CAN J/C.
(b) Measure the resistance between terminals 14 (CANL) and 16 (BAT) of the DLC3 each time a connector is disconnected.