toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Timing Chain|Specifications|Page 1806 > < Timing Chain|Specifications|Page 1804
Page 8
background image

8. REMOVE ENGINE MOVING CONTROL ROD W/ BRACKET

(a)

Remove the 3 bolts and control rod.

9. REMOVE ENGINE MOUNTING STAY NO.2 RH

10. REMOVE ENGINE MOUNTING BRACKET NO.2 RH
11. REMOVE FAN AND GENERATOR V BELT
12. REMOVE NO.1 ENGINE COVER SUB-ASSEMBLY
13. REMOVE ENGINE WIRE
14. REMOVE GENERATOR ASSEMBLY
15. REMOVE VANE PUMP ASSEMBLY
16. REMOVE IGNITION COIL ASSEMBLY
17. DISCONNECT VENTILATION HOSE
18. DISCONNECT VENTILATION HOSE NO.2

19. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY

(a)

Remove the bolt and disconnect the engine wire harness clamp.

(b) Remove the 8 bolts and 2 nuts, and disconnect the cylinder head cover.

20. SET NO.1 CYLINDER TO TDC/COMPRESSION

21. REMOVE CRANKSHAFT PULLEY

(a)

Using SST, fix the pulley and loosen the bolt. 
SST 09960-10010 (09962-01000, 09963-01000)

(b) Using SST, remove the bolt and pulley.

SST 09950-40011 (09951-04010, 09952-04010, 09953-04030, 09954-04010, 09955-04041, 09957-04010, 91111-51014)

Timing Chain|Specifications|Page 1806 > < Timing Chain|Specifications|Page 1804